Tools
- Clean microfiber cloth
- Vehicle-approved glass or surface cleaner
Clean approved ADAS camera and sensor surfaces
Remove ordinary external contamination without moving, polishing or recalibrating sensors.
10–20 min2 toolssafety
Parts and supplies
No replacement part required.
Before starting
- External sensor locations are identified from the owner manual
- Vehicle is parked and switched off
One step at a time
Realistic views show the component and hand action for each step. Exact layout varies by vehicle, so always confirm access in the applicable manual.
STEP 1
Read the warning
Record the exact feature and message before cleaning; distinguish blocked/unavailable from a base brake or steering warning.
CheckpointNo red base-system warning or unintended intervention requires immediate service.
STEP 2
Locate approved surfaces
Use the owner manual to identify windshield camera viewing areas and external radar, ultrasonic or camera covers.
CheckpointOnly external owner-cleanable surfaces are selected.
STEP 3
Clean gently
Remove snow, ice, mud or film using the approved method and a clean soft cloth.
CheckpointNo cover is scratched, loosened or displaced.
STEP 4
Recheck in good conditions
Restart and observe in clear weather with visible lane markings; do not provoke automatic emergency braking.
CheckpointA persistent clear-condition warning is referred for scan, mounting and calibration checks.
Post-repair verification
- Surfaces are clean and undamaged
- Feature status is recorded
- No unsafe feature test was attempted